Tag: Gunite Pump
When you are working on a gunite pool, it is likely that one of the things you would need to do is buy spare parts for your machine. This article has some tips on what to look for when buying spare parts and how they can be helpful in keeping your gunite pool looking great!
What are spare parts for a gunite pump?
A gunite pump is a piece of equipment used to create a vacuum seal between two pieces of material. It is typically used in the food industry to pack food. When designing or repairing a gunite pump, it is important to keep in mind the types of spare parts that are available. There are three main types of spare parts: drive components, seal components, and pressure switches. To get reliable granite pump spare parts you can go to https://petramix.com.
Image Source: Google
A drive component is a part that actually moves the seal around the chamber. It can be a gear or a motor. A seal component is what creates the vacuum seal between the two pieces of material. They can be either mechanical or hydraulic seals. The most common type of seal component is a hydraulic seal. A pressure switch controls the amount of pressure that is applied to the drive component or seal component so that it can move freely around the chamber.
When should you replace your parts in a gunite pump?
- If the pump begins making noise or has reduced performance, it is time to replace parts.
- Parts that wear down quickly, such as impellers and bearings, should be replaced every 6 months.
- If the gunite starts to leak, the seals may be worn or broken. In this case, it is recommended that you replace the entire pump.