Preparing The Wall For Repointing

When it comes to brick repointing, there are a few things you need to know in order to get the job done right. The first is that you'll need a mortar mix that's specifically designed for brick. You can also hire experts for brick repointing in Sydney via https://www.keystonepointing.com.au/brick-repointing-sydney.

 You can also use an acid-based sealant if you're repairing masonry, but the mortar is generally the most effective option. Second, make sure your tools are up to the task. You'll need a trowel and a level, as well as a bucket and masonry sand.

And finally, be prepared for some potential messes! Brick repointing is messy work, so be prepared to clean up any spills or messes made during the process.

STEP 1: Mix the mortar according to the manufacturer's instructions. Use a level to make sure the mortar is level and smooth.

STEP 2: Apply the mortar to the wall using a trowel. Make sure that you apply enough mortar to cover the area that you'll be repointing. Let the mortar dry for at least 24 hours, or preferably longer.

STEP 3: Use a bucket of masonry sand to gently remove any excess mortar from the wall. Be careful not to scratch the wall surface with the sand. Repeat Steps 2 and 3 until you've removed all of the mortar from the wall.

STEP 4: Apply an acid-based sealant if desired. Allow the sealant to dry for at least 24 hours, or preferably longer.

Share this post: on Twitter on Facebook on Google+